Serving the Raleigh area  ·  (984) 733-0998  ·  Open Mon-Sun 7am-7pm
📞 (984) 733-0998 Free Quote

Metal Roofing in Zebulon, NC (27597) · Local Professionals

Raleigh Metal Roofing · Fast response in Zebulon and the Raleigh area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Zebulon is farm country with a small-town center, and the roofs here show it. White farmhouses with standing seam tin, tobacco barns with corrugated panels, and brick ranches along Arendell Avenue all sit under the same tall loblolly pines, and that mix is exactly what we work on.

Homeowners in 27597 call Raleigh Metal Roofing because we know how humid Wake County summers crack washers and fade paint on older panels. We have been serving Zebulon and the surrounding area since 2009, and we treat a barn roof with the same care as a porch roof on a Victorian in Oakwood.

Metal Roofing in Zebulon (27597)

Zebulon sits in the rolling Piedmont east of Raleigh, where lots are often long and narrow off roads like Buffalo Road and Mack Todd Road, and where farm buildings sit back from the road behind a stand of pines. That means access can be tight for a full tear-off, and we plan panel delivery and staging around driveways, fences, and well heads. The ground here holds moisture after afternoon thunderstorms, so we check grade and drainage at the eaves before we ever set a ladder. Older barns and farmhouses often have corrugated or ribbed panels with fasteners that have backed out or washers that have dried and cracked, which is the most common leak source we find in this part of Wake County. We also see paint fading and chalking on south-facing panels after years of humid heat.

Our team has worked in Zebulon and across the Raleigh area since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation, and we handle both residential and agricultural metal roofing here.

Our services in Zebulon

How a Job Works in Zebulon

Step 1: you call (984) 733-0998 or request a free estimate, and we set a time to walk the property. On site we check the panels, fasteners, flashing, and attic side if accessible, and we talk through whether a repair, a retrofit over shingles, or a full replacement makes sense for your building.

Step 2: we schedule the work and pull the required roofing permit through the local building department. On farm properties we plan around equipment and livestock, and on in-town lots we coordinate with HOAs and historic review if your property falls under design rules. We keep the crew and materials organized so a tight driveway or a narrow side yard does not turn into a mess.

Step 3: we clean up daily, magnet-sweep for fasteners, and do a final walkthrough with you. We leave your property clean and show you what was done before we pack up.

Pricing in Zebulon depends on the job. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight work at $600. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is often the right fit for barns and outbuildings. The main cost factors are roof size and pitch, access and staging, the condition of the existing roof, and how urgent the work is. Call (984) 733-0998 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Zebulon and nearby areas.

My barn off Buffalo Road has corrugated panels with rusted fasteners. Can you repair it without a full replacement?
Usually yes. On many Zebulon barns and outbuildings the panels are still sound and the failure is at the fasteners and washers. We replace the screws, re-fasten the panels, and treat surface rust where it makes sense. If the panels are perforated or the purlins are compromised, we will tell you honestly and quote a replacement.
A storm just lifted panels on my roof in Zebulon. How fast can you get out?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels. Call (984) 733-0998 and describe the damage. We will schedule an inspection, document what we find for your insurance claim, and make temporary repairs if needed to keep water out.
What does a metal roof cost for a typical Zebulon ranch or farmhouse?
For a typical single-story ranch, installation often lands in the range of $8 to $10 per square foot depending on panel type and roof complexity, with standing seam at the higher end. A repair or leak fix commonly starts around $450. We give a written free estimate after we see the roof.
Do I need a permit to replace my roof in Zebulon?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. We confirm the rules with the local building department before work starts, and you can also check the City of Zebulon website at https://www.wake.gov for local information. We handle the permit process as part of the job.
My neighbor's trees drop limbs on my roof and an HOA wants a specific panel color. How do you handle that?
We coordinate with HOA design review on panel profile and color before ordering materials, and we document property lines and setbacks if a neighbor issue comes up. If limbs from a neighboring tree caused the damage, we note it in our inspection report so you have a clear record for your insurer or for a conversation with the neighbor.
Are you insured for work on my Zebulon property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before we start, and our crews are covered on your property.
What maintenance does a metal roof need in Zebulon's climate?
The humid summers and afternoon storms here are hard on fasteners and paint. We recommend an inspection after storm season and every few years, with a focus on washers, fasteners, and flashing at chimneys and skylights. A coating or paint refresh starting at $2.50 per square foot can extend the life of older panels, and snow guards and ice protection start at $1,200 for homes that need them.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Raleigh

All your work handled by qualified professionals in Raleigh

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Raleigh

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Raleigh · Response within 24h · No commitment · ☎ (984) 733-0998

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Raleigh ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm