Serving the Raleigh area  ·  (984) 733-0998  ·  Open Mon-Sun 7am-7pm
📞 (984) 733-0998 Free Quote

Metal Roofing in Rolesville, NC (27571) · Local Professionals

Raleigh Metal Roofing · Fast response in Rolesville and the Raleigh area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Rolesville is one of the fastest-growing towns in Wake County, and its newest subdivisions off Rolesville Road and Highway 401 are full of two-story homes on open lots where the wind hits hard before the trees fill in. That exposure is exactly why so many homeowners here are asking about metal shingles and standing seam instead of another asphalt roof.

We are Raleigh Metal Roofing, based in Raleigh and serving Rolesville (27571) since 2009. When a storm rolls through and you hear a panel rattling over on your street near Rolesville Elementary, you want a crew that knows this town and can get out to take a look.

Metal Roofing in Rolesville (27571)

Rolesville sits on the rolling Piedmont just northeast of Raleigh, and the housing stock here is a mix of brand-new construction and older farmhouses on larger lots. In the newer subdivisions, lots are graded tight and drainage swales run close to the foundation, so we pay attention to where downspouts discharge and how panels are cut at the valleys. On the older properties along Rolesville Road and near the downtown area, we often find original roof decks that need a once-over before we fasten anything down. The tall loblolly pines that shade much of the town are beautiful, but they drop limbs and needles that clog gutters and scuff panel finishes, and the afternoon thunderstorms that build up in summer can lift a poorly fastened panel in minutes.

Our team has been working in Rolesville and the surrounding Raleigh area since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation, and we handle everything from a single leak repair to a full metal shingle roof on a new build.

Our services in Rolesville

How a Job Works in Rolesville

Step 1: You call us at (984) 733-0998 or send a request, and we set up a free on-site assessment. We walk the roof, check the decking and flashing, and talk through what you are seeing, whether that is a stain on the ceiling or a panel that flapped in the last storm. You get a written estimate before any work starts.

Step 2: Once you approve, we pull the permit through the local building department and schedule the work. In Rolesville, HOA approval can add a week or two for color and profile sign-off, so we build that into the timeline. Tight lots in the newer subdivisions mean we stage materials carefully and keep the driveway clear for your neighbors.

Step 3: We clean up every day and do a final walkthrough with you when the job is done. Magnets go over the lawn for nails, gutters get checked, and we leave your property clean. You get a chance to look at the work before we pack up.

Pricing in Rolesville depends on the size and pitch of your roof, how easy it is to access, and the condition of the decking underneath. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Metal shingle roofing and stone-coated steel both start around $9 per square foot, and corrugated panel roofing starts around $5.50. Repairs and leak fixes start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs start around $9 per linear foot. Every roof is different, so call us at (984) 733-0998 for a free estimate and a real number for your home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Rolesville and nearby areas.

My house is in one of the new subdivisions off Rolesville Road, and the wind seems stronger here than in town. Will metal shingles hold up better than shingles?
Yes, and that is a big reason we recommend them for newer Rolesville neighborhoods. Metal shingles are installed with fasteners rated for high wind, and they interlock to resist uplift. On open lots where the trees have not grown in yet, that extra holding power makes a real difference during summer thunderstorms.
A storm just came through and I think I have a lifted panel on my roof in Rolesville. How fast can you get out?
Call us at (984) 733-0998 and we will schedule a free inspection, usually within a day or two depending on storm volume. If there is an active leak, we can often tarp it temporarily to stop the water while we order materials. We serve all of Rolesville and the surrounding Wake County area.
What does a typical metal roof replacement cost for a house in Rolesville?
Most full replacements in Rolesville fall in the range of $9 to $14 per square foot installed, depending on the material and the complexity of the roof. A simple ranch with a low pitch is on the lower end, while a two-story with dormers and valleys is higher. We give you a written estimate after a free inspection, so you know exactly what your roof will cost.
Do I need a permit for a metal roof in Rolesville, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Rolesville, and the rules vary by jurisdiction. We pull the permit for you and coordinate the inspection. For the specific requirements that apply to your address, check the City of Rolesville website or call the local building department, since thresholds and fees can change.
My HOA has rules about roof color and style. Can you help with approval before we order materials?
Yes. We regularly work with HOAs in Rolesville, and we can provide product specs, color samples, and installation details for the architectural review. We recommend getting approval before we order, since some boards take a couple of weeks. If your neighbor's property line is close, we also check setbacks and drainage so the install does not create a problem.
Are you insured for work on my Rolesville property?
We are fully insured, with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job. We are happy to provide a certificate of insurance before we start.
What should I do to maintain a metal roof in Rolesville between storms?
Keep the gutters clear of pine needles and leaves, especially if you have tall pines nearby. Twice a year, look for loose fasteners or debris on the roof, and after a big storm, check for dented panels or lifted edges. A quick inspection in spring and fall goes a long way. If you are not comfortable on the roof, call us for a free inspection at (984) 733-0998.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Raleigh

All your work handled by qualified professionals in Raleigh

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Raleigh

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Raleigh · Response within 24h · No commitment · ☎ (984) 733-0998

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Raleigh ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm