Serving the Raleigh area  ·  (984) 733-0998  ·  Open Mon-Sun 7am-7pm
📞 (984) 733-0998 Free Quote

Metal Roofing in Knightdale, NC (27545) · Local Professionals

Raleigh Metal Roofing · Fast response in Knightdale and the Raleigh area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Knightdale is where the old railroad town meets the new suburbs, with farmhouses on generous lots just minutes from the shops and restaurants along Knightdale Boulevard. The mix of 1990s and 2000s subdivisions, like Planters Walk and Widewaters, plus the classic tin-roofed farmhouses out toward Hodge Road, means we see every kind of metal roof here.

Homeowners in 27545 call Raleigh Metal Roofing because we understand the local conditions: summer thunderstorms that send pine limbs down on standing seam, and the occasional ice storm that works its way under flashing. We have been serving Knightdale and the greater Raleigh area since 2009, and we are a Metal Roofing Alliance member.

Metal Roofing in Knightdale (27545)

Knightdale sits in the rolling Piedmont, and the soil here holds water after heavy rains, so proper drainage around your foundation matters. Many of the newer subdivisions have tight lots with mature loblolly pines close to the house, which means gutters fill quickly and shade keeps roofs damp, leading to algae streaks on shingle roofs and faster fastener corrosion on older metal. The classic white farmhouses often have standing seam roofs that need re-fastening or a fresh coating, while the newer homes may need a full replacement after hail or wind. We handle both, and we know how to work around the landscaping and fences that are common in Knightdale yards.

Our team has been serving Knightdale and the Raleigh area since 2009, and we are fully insured with general liability and workers' compensation.

Our services in Knightdale

How a Job Works in Knightdale

Step 1: Call us at (984) 733-0998 or request a free estimate online. We will schedule a time to inspect your roof, discuss your options, and provide a written estimate. For storm damage, we offer a free inspection and can help document the damage for your insurance claim.

Step 2: Once you approve the estimate, we will pull the necessary permits from the local building department and schedule the work. In Knightdale, some neighborhoods have HOA design review, so we can coordinate with your HOA to make sure the panel profile and color are approved. Our crews are experienced with tight lot access and will protect your landscaping during the project.

Step 3: After the work is complete, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We leave your yard as clean as we found it.

Pricing for metal roofing in Knightdale depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof over shingles (retrofit) at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot. These are starting prices, and your final cost will be confirmed after a free on-site estimate. Call (984) 733-0998 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Knightdale and nearby areas.

My farmhouse near Hodge Road has an old tin roof that is starting to rust. Can you restore it or does it need to be replaced?
We can often restore an old tin roof with our Metal Roof Coating & Painting service, which starts at $2.50 per square foot. If the rust has caused holes or the metal is too far gone, we may recommend a metal roof over shingles (retrofit) or a full replacement. We will inspect it and give you honest options.
A storm just knocked a pine limb onto my roof in Planters Walk. How quickly can you respond?
We offer free inspections for storm and wind damage and can usually schedule an assessment within a day or two. Call us at (984) 733-0998 to report the damage and we will get a crew out to tarp or repair as needed.
What is the typical cost for a metal roof replacement on a 2,000 square foot house in Knightdale?
For a standard 2,000 square foot home, a metal roof replacement typically starts around $9 per square foot, but the final price depends on the roof pitch, access, and material chosen. We provide a free estimate so you know exactly what to expect.
Do I need a permit for a metal roof in Knightdale, and how do I find out about local rules?
Yes, roofing permits are commonly required for a full replacement or re-roof in Knightdale. The best place to start is the City of Knightdale website (https://www.wake.gov) or a call to the local building department, since thresholds and fees can vary. We handle the permit application for you as part of the job.
My neighbor's tree branches hang over my property line. Can I trim them, and does my HOA need to approve my new roof color?
In North Carolina, you generally have the right to trim branches that overhang your property line, but it is wise to check with a lawyer or your local municipality. For HOA approval, we can provide color samples and documentation to submit to your HOA board before installation.
Are you fully insured for work at my Knightdale home?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We are happy to provide a certificate of insurance upon request.
What maintenance should I do each year to keep my metal roof in good shape in Knightdale's climate?
We recommend having your roof inspected annually, especially after storm season. Keep gutters clear of pine needles and debris, and check for loose fasteners or damaged flashing. A periodic coating can extend the life of an older metal roof.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Raleigh

All your work handled by qualified professionals in Raleigh

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Raleigh

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Raleigh · Response within 24h · No commitment · ☎ (984) 733-0998

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Raleigh ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm