Licensed & Insured, in Raleigh and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Raleigh
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (984) 733-0998 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Raleigh and surrounding areas · On-site visits included · Free estimate within 24h
Raleigh Metal Roofing is a team of local certified professionals based in Raleigh. We respond quickly in Raleigh and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (984) 733-0998⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“We have a big old wood barn out back and I was worried the metal roof over the shingles wouldn't work on something that age. The crew measured the whole span, laid down the underlayment, and had the corrugated panels on in two days. No more leaks over the hay.”
Metal Roof Over Shingles (Retrofit)
“Had them redo the porch roof with standing seam and it looks fantastic. They matched the finish to the main house perfectly and cleaned up every last screw and scrap before leaving. Only reason it's not five stars is the schedule slipped a few days, but the work itself is top notch.”
Standing Seam Metal Roofing
“New build on our timber frame home and Raleigh Metal Roofing handled the whole roof install. Went with stone-coated steel in a dark charcoal and it turned out even better than the samples. Straightforward crew, showed up when they said they would.”
Metal Roof Installation
“Tore off the old rusted panels on our ranch house and put up new ribbed metal. The difference is night and day, no more rattling in the wind and the house stays cooler. Took about three days for roughly 1,800 square feet.”
Metal Roof Replacement
“Had a persistent leak around a pipe penetration on our steel roof that two other guys couldn't figure out. These folks found it, re-flashed it properly, and sealed it up in one visit. Two heavy rains since and bone dry.”
Metal Roof Leak Repair
“Our white house had a faded metal roof that made the whole place look tired. They coated and repainted it in a fresh light gray and honestly it looks like a brand new roof for a fraction of the cost. Neighbors have already asked for their number.”
Metal Roof Coating & Painting
“We wanted copper accents on the wood house we were building and they nailed the detail work around the dormers and chimney flashing. Pricey, sure, but the craftsmanship is obvious every time I pull in the driveway.”
Copper & Specialty Metal Roofing
“They re-roofed our brick building's metal section after storm damage and coordinated everything with our insurance adjuster, which saved me a ton of headaches. Wind damage repair plus new fasteners and flashing done in under a week. Solid outfit.”
Commercial & Agricultural Metal RoofingReal photos of our work in Raleigh · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel roof | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, and ribbed panels; price rises with roof pitch and complexity |
| Standing seam metal roof | Starting at $12/sq ft | Concealed fasteners and raised seams; cost climbs with dormers, valleys, and historic district requirements |
| Stone-coated or metal shingle roof | Starting at $11/sq ft | Textured or stamped panels for HOA-approved looks; steep slopes and cut-up roofs add labor |
| Copper and specialty metal | On estimate | Material cost and detail work on turrets or bay roofs need an on-site look before pricing |
| Deck repair and flashing | Quoted after tear-off | Sheathing replacement and chimney or skylight flashing priced once the deck is exposed |
| Estimate | Free | Response within 24 hours at (984) 733-0998, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, standard gable | Starting at $10/sq ft | Includes tear-off, underlayment, and panels; price rises with gauge, pitch, and access difficulty. |
| Mechanically seamed, 24-gauge Kynar 500 | Starting at $13/sq ft | Premium finish and locked seams; roof complexity and penetration count move the final number. |
| Complex or historic home (turrets, valleys, dormers) | On estimate | Multiple valleys and design review require an on-site measurement before any number is given. |
| Standing seam over existing shingles (retrofit) | On estimate | Code limits on existing layers and deck condition determine whether a recover is possible. |
| Travel | Included | In Raleigh and surrounding Wake County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (984) 733-0998, written scope, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and standing seam replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment, and concealed-fastener panels; steep pitch or complex roof lines raise the rate. |
| Tear-off and exposed-fastener panel replacement | Starting at $8/sq ft | Includes tear-off, decking repair allowance, and corrugated or ribbed panels; panel gauge and trim count move the price. |
| Metal shingle or stone-coated steel replacement | Starting at $11/sq ft | Includes tear-off, underlayment, and stamped panels; historic district detailing and turret work add labor. |
| Over-shingle retrofit (where code allows) | Starting at $7/sq ft | Includes new metal over one existing shingle layer; limited to roofs that pass a decking and code check first. |
| Copper or specialty metal replacement | On estimate | Material cost and custom fabrication drive the number, so we measure and quote on site before ordering. |
| Estimate and storm documentation | Free | Response within 24 hours at (984) 733-0998; includes photo documentation for insurance claims, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit over one shingle layer | Starting at $7/sq ft | Includes separation layer, corrugated or ribbed panels, trim, and labor on a sound single-layer roof. |
| Standing seam retrofit over one shingle layer | Starting at $11/sq ft | Concealed fasteners and raised seams, priced higher for the premium profile and longer service life. |
| Metal shingle or stone-coated steel retrofit | Starting at $10/sq ft | Stamped or stone-coated panels that satisfy HOA and historic district design review rules. |
| Tear-off and full replacement | On estimate | Required when two or more shingle layers exist or the deck shows rot and soft spots. |
| Travel | Included | In Raleigh and surrounding Wake County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (984) 733-0998, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single panel repair | Starting at $450 | Includes site visit, panel replacement, and sealant; access and roof pitch move the price |
| Flashing and penetration repair | Starting at $650 | Chimney, skylight, or sidewall flashing rebuild; height and number of penetrations raise it |
| Fastener replacement run | Starting at $550 | Re-seats backed-out screws with new washers; roof size and count of failed fasteners drive cost |
| Storm and limb damage repair | On estimate | Needs an on-site look to map panel, seam, and trim damage before pricing |
| Travel | Included | in Raleigh and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair | Starting at $450 | Covers fastener replacement, a single penetration reseal, or a small flashing fix with written scope |
| Flashing or chimney rebuild | Starting at $850 | Rebuilds failed flashing at chimneys and sidewalls; steep or complex roofs push the price higher |
| Multiple leak points | Starting at $1,200 | Several separate entry points traced and repaired in one visit, common on older exposed-fastener roofs |
| Emergency tarping | Starting at $350 | Secures the roof after storm damage; after-hours and hurricane response may add to the rate |
| Complex or large-scale job | On estimate | Rot damage, widespread seam failure, or historic-district roofs need an on-site look before pricing |
| Travel | Included | In Raleigh and surrounding Wake County towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (984) 733-0998, no obligation to book the repair |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small repair) | Starting at $750 | Covers pulling and resetting a limited count of failed screws with new washers on one roof area. |
| Partial re-screw (one slope) | Starting at $1,450 | Replaces every suspect fastener on a single slope, including ridge and eave line screws. |
| Full roof re-screw | Starting at $2,900 | Every fastener on the roof replaced in one pass, priced by panel count and roof pitch. |
| Rusted hole treatment and oversized fasteners | On estimate | Needs an on-site look when holes are elongated or rusted through the panel steel. |
| Travel | Included | in Raleigh and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof | Starting at $5.50/sq ft | Installed corrugated panels with fasteners and closures; gauge and pitch move the price |
| Ribbed (R-panel) roof | Starting at $6.00/sq ft | R-panel with proper screw pattern and closures; span and panel length affect cost |
| 5V crimp panel roof | Starting at $6.50/sq ft | Traditional 5V crimp with gasketed fasteners; steeper pitches and penetrations add labor |
| Panel repair and re-fastening | On estimate | Screw replacement, closures, and leak fixes priced after we see the roof |
| Travel | Included | in Raleigh and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard profile | Starting at $9/sq ft | Includes materials, underlayment, flashing and labor on a simple roof with normal access. |
| Premium slate or shake profile | Starting at $12/sq ft | Textured panels and more cut work at hips, valleys and dormers raise the installed rate. |
| Tear-off and deck repair | On estimate | Old layers, rotten sheathing and steep pitches need an on-site look before pricing. |
| Travel | Included | In Raleigh and surrounding Wake County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard stone-coated steel install | Starting at $9/sq ft | Includes tear-off of one shingle layer, underlayment, standard flashing, and panels; deck repair adds cost. |
| Premium shake or tile profile | Starting at $12/sq ft | Textured premium profiles and heavier-gauge steel cost more per square; complex geometry raises labor. |
| Retrofit over existing shingles | On estimate | Code limits on existing layers and deck condition must be verified on site before pricing. |
| Deck repair or fascia replacement | On estimate | Rot discovered after tear-off is priced per sheet; older Beltline homes often need this. |
| Travel | Included | In Raleigh and surrounding Wake County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay window roof | Starting at $20/sq ft | Includes templating, fabrication and soldered copper pans; curved shapes and steep access raise the rate. |
| Zinc or aluminum accent panels | Starting at $20/sq ft | Includes formed panels and trim for accents; material choice and substrate condition move the price. |
| Full architectural copper or zinc roof | On estimate | Whole-roof specialty metal needs an on-site look at pitch, substrate and flashing before pricing. |
| Custom fabrication and trim | On estimate | Chimney caps, dormers and curved trim are priced from measured templates, not square footage. |
| Travel | Included | In Raleigh and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Acrylic coating system | Starting at $2.50/sq ft | Includes pressure wash, primer, and two finish coats on sound metal with light chalking |
| Elastomeric coating system | Starting at $3.75/sq ft | Adds crack bridging and pinhole sealing, priced higher for seam fatigue and minor rust |
| Rust treatment and coating | Starting at $4.50/sq ft | Includes rust conversion, fastener replacement, primer, and finish coats on corroded panels |
| Historic or color-matched refinish | On estimate | Custom color matching and design review coordination require an on-site look before pricing |
| Travel | Included | in Raleigh and surrounding Wake County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight re-flash (single) | Starting at $600 | Includes removal of old curb flashing, new counterflashing and back pan, plus water test on completion. |
| Chimney step flashing repair | Starting at $850 | Covers new bent step flashing on one chimney side; price rises with height, pitch and brick vs sided stack. |
| Chimney cricket rebuild | Starting at $1,400 | Framing and flashing a new cricket behind a wide chimney; cost moves with deck repair and access. |
| Valley metal replacement | Starting at $900 | New clipped valley metal per section; increases with roof pitch, debris load and number of valleys. |
| Complex or large-scale job | On estimate | Multiple penetrations, rot in sheathing, or steep historic roofs need an on-site look before quoting. |
| Estimate | Free | Response within 24 hours at (984) 733-0998; no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single entry or walkway run | Starting at $1,200 | Pad-style guards over one door or walkway, including layout and installation. |
| Full roof snow guard system | Starting at $2,400 | Multiple rows across the slide path, priced by roof height and linear footage. |
| Bar and rail system | Starting at $3,200 | Heavy rail system for steep roofs above decks or driveways, priced by run length. |
| Ice shield and eave protection | Starting at $1,500 | Eave shielding where meltwater backs up, priced by eave length and access. |
| Complex or large-scale job | On estimate | Multi-level roofs, historic homes, or mixed panel types need an on-site look first. |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage report | Free | Full roof and attic inspection with photos and a written repair versus replacement recommendation. |
| Minor repair (fasteners, trim, small panel) | Starting at $350 | Covers screw replacement, resealing and one small panel; price moves with panel count and roof access. |
| Panel or sectional replacement | Starting at $900 | Includes matching panels and trim; cost rises with panel length, pitch and how many purlins need work. |
| Tree strike with structural damage | On estimate | Decking and purlin repair need an on-site look before we can quote a firm number. |
| Travel | Included | In Raleigh and surrounding Wake County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (984) 733-0998, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Routine metal roof inspection | Free estimate | Single-visit walk with photo report, priced by roof size, pitch, and access. |
| Leak tracing inspection | Starting at $250 | Targeted flashing and penetration check plus attic-side review, priced by roof complexity. |
| Pre-sale or insurance report | Starting at $350 | Written report with remaining service life, priced by documentation depth and roof size. |
| Post-storm damage inspection | On estimate | Scope depends on storm severity, panel type, and whether an insurance report is needed. |
| Travel | Included | In Raleigh and surrounding Wake County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (984) 733-0998, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter, single story | Starting at $9/linear ft | Includes 5 inch seamless trough, hidden hangers, and standard downspouts; footage and outlet count move the price. |
| Seamless gutter, two or three story | Starting at $13/linear ft | Includes taller access, safety rigging, and longer downspout runs; height and roof pitch drive the increase. |
| Needle rated gutter guards | Starting at $6/linear ft | Fine mesh sized for pine needles and oak tassels; tree density and roof access affect the final figure. |
| Half round on historic or curved fascia | On estimate | Custom fabrication on site for turrets and angled porches; needs a walk of the roof before pricing. |
| Travel | Included | In Raleigh and surrounding Wake County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (984) 733-0998, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial or agricultural roof inspection | Free estimate | On-site walk, photo documentation and written scope; roof height and access drive the visit time |
| Screw replacement and re-fastening | Starting at $450 | Covers backed-out screws, dried washers and lap resealing; panel count and roof pitch move the price |
| Exposed-fastener panel replacement | Starting at $1,200 | New corrugated or ribbed panels over sound purlins; square footage and trim detail set the range |
| Standing seam system for commercial or church | On estimate | Concealed-fastener panels need an on-site look at deck, clip spacing and flashing before pricing |
| Travel | Included | in Raleigh and surrounding Wake and Johnston County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (984) 733-0998, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Raleigh need a crew that understands how this climate and housing stock actually treat a roof. Raleigh Metal Roofing works on steep pitches, under heavy tree cover, and on high-exposure homes where summer storms and winter ice test every fastener and seam. We also see a large stock of aging screw-down roofs whose washers are drying out, so repair work is a big part of what we do. Our network of licensed, insured local contractors handles metal roof installation, replacement, re-roof, and repair on homes across Raleigh, Cary, Apex, Wake Forest, and Morrisville.
From Victorian porches in Oakwood to brick ranches inside the Beltline and newer two-story homes in North Raleigh, the right metal system depends on the house, the deck, and the budget. We walk you through the honest options before anyone orders material. To start, request a free estimate and we will look at your roof, your attic, and your goals.
Most metal roof leaks we find in Raleigh trace back to a handful of causes, and the number one on 15 to 30 year old exposed-fastener roofs is fastener back-out. The EPDM sealing washer under each screw dries, shrinks, and cracks with sun and heat cycles, so water slips past the head. Seam separation from thermal movement opens a path on standing seam panels, and failed pipe boots or flashing at chimneys, skylights, and valleys let water in at the most common penetration points. Wind-lifted panels after a thunderstorm or hurricane remnant, plus punctures from fallen pine limbs, round out the list.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling may sit ten feet from the actual gap. By then, sheathing can rot and insulation can soak and lose performance. That is why we open up the assembly and trace the water rather than patching the first wet spot we see.
The honest repair versus replace call depends on the panel condition, the deck, and how many fasteners are failing. Often, a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right move. For active leaks, call (984) 733-0998 or visit our metal roof leak repair page so we can get eyes on it fast.
We install the full range of metal systems, and matching the system to the home matters more than picking the most expensive panel. Standing Seam Metal Roofing uses concealed clips and no exposed screws, which makes it the premium choice for a primary residence. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops, while Metal Shingle Roofing and Stone-Coated Steel Roofing suit homeowners who want a traditional look. Copper & Specialty Metal Roofing works well for porches, turrets, and accents.
Here is the honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over the roof's life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option, and when it is not, a full tear-off is the right call.
Metal roof installs are typically quoted per square foot, while repairs are often flat-rate. The price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof instead of a ballpark.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city and by the scope of work. Historic district or HOA design review can also affect panel profile and color choices.
We are glad to point you toward the right office, but we do not give permitting advice. Requirements vary, always verify with the Raleigh building or planning department before starting your project. If you have questions about the work itself, contact us and we will walk you through what we see.
Ready to get started? Raleigh Metal Roofing serves in Raleigh and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Raleigh · Response within 24h · No commitment · ☎ (984) 733-0998
Your Free Quote Request