Serving the Raleigh area  ·  (984) 733-0998  ·  Open Mon-Sun 7am-7pm
📞 (984) 733-0998 Free Quote

Metal Roofing in Apex, NC (27502) · Local Professionals

Raleigh Metal Roofing · Fast response in Apex and the Raleigh area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Apex is a fast-growing town where new neighborhoods near Jordan Lake sit beside older streets just off Salem Street, and the mix of housing stock means metal roofing questions here are rarely one-size-fits-all. From two-story homes in Bella Casa to brick ranches closer to downtown, the lots, tree cover, and roof pitches change block by block.

Homeowners in Apex (27502) call Raleigh Metal Roofing because we have been working under these tall loblolly pines since 2009, and we know how to handle the pine needles, limb drops, and summer storms that come with them. We are a Metal Roofing Alliance member and fully insured, and we give free estimates for standing seam, installation, and repair work.

Metal Roofing in Apex (27502)

Apex sits in the rolling Piedmont, and the terrain here matters. Many neighborhoods near Jordan Lake have grade changes and tight side yards, so staging panels and getting equipment to the back of the house takes planning. The tall pines are the bigger issue: they drop needles that clog gutters and valleys, and limbs come down in ice storms and hurricane remnants. We see a lot of failed fasteners and separated seams on older metal roofs, and on shaded shingle roofs we see black algae streaks that push homeowners toward metal in the first place. Standing seam is popular on new construction in Apex because it sheds pine debris better and holds up to wind uplift.

Our team has served Apex and the surrounding Raleigh area since 2009, handling everything from a single leak repair to a full replacement with standing seam or stone-coated steel. We know the local housing stock, from the newer subdivisions off Kelly Road to the older homes closer to downtown, and we plan each job around the trees, the access, and the weather.

Our services in Apex

How a Job Works in Apex

Step 1: you call (984) 733-0998 or request a free estimate online. We schedule an on-site assessment, look at the roof, the attic if needed, and the surrounding trees, and we give you a written scope with pricing. No pressure, no vague numbers.

Step 2: once you approve, we pull the required permits through the local building department and coordinate any HOA design review if your neighborhood has one. On the work days, our insured crew protects your landscaping, stages materials where access allows, and installs or repairs the roof. We deal with the tight lots and pine trees so you do not have to.

Step 3: we clean up every day and do a final walkthrough with you. We magnet-sweep for nails, haul away old material, and make sure you know what was done and what to watch for. We leave your property clean.

Pricing in Apex depends on the size and pitch of your roof, the condition of the decking, access around the house, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (984) 733-0998 for a free estimate and a clear number for your Apex home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Apex and nearby areas.

My Apex neighborhood has tall pines that drop limbs. Will a metal roof hold up better than shingles?
Yes, generally. Standing seam and other metal panels resist punctures from small limbs better than asphalt shingles, and they shed pine needles and debris more easily. That said, a large falling limb can damage any roof, so we recommend keeping trees trimmed back and scheduling an inspection after major storms. In neighborhoods near Jordan Lake where pines are dense, we often suggest standing seam because the fasteners are hidden and there are fewer places for debris to catch.
A storm just knocked limbs onto my roof in Apex. How fast can you respond?
We offer free inspections for storm and wind damage and prioritize active leaks. Call (984) 733-0998 and we will schedule a visit as soon as possible, usually within a day or two depending on call volume after a storm. We can tarp an active leak to prevent further damage and then give you a written repair estimate.
What does a typical metal roof replacement cost in Apex?
Most full replacements in Apex fall in the range of $9 to $14 per square foot installed, depending on the material. Standing seam runs higher, starting around $10 per square foot, while corrugated panel starts lower. The total depends on your roof size, pitch, decking condition, and access. We give free estimates with itemized pricing so you can see exactly what drives the cost.
Do I need a permit to replace my roof in Apex, and how do I check the rules?
Yes, roofing permits are commonly required for a full replacement or re-roof in Apex, and the thresholds and inspection requirements are set by the local building department. We pull the permits for you and schedule the inspections. You can also verify current requirements directly through the City of Apex website at https://www.apexnc.org before you start a project.
My Apex HOA has design rules. Can you help with approval for a metal roof?
We can provide product specifications, color samples, and panel profiles for your HOA submission. Many Apex neighborhoods have design review requirements that restrict panel style and color, so it is best to get approval before ordering materials. We will coordinate with your HOA point of contact and adjust the plan if they require a different profile.
Are you insured for work on my Apex property?
Yes. Raleigh Metal Roofing is fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before work begins so you have it for your records.
What maintenance does a metal roof need in Apex's climate?
In Apex, the main maintenance items are keeping gutters and valleys clear of pine needles, checking fasteners after major storms, and inspecting flashing around chimneys and skylights once a year. Ice dams can form at the eaves during the occasional ice storm, so we also check attic insulation and ventilation. A free annual inspection is a good habit, and we can set one up for you.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Raleigh

All your work handled by qualified professionals in Raleigh

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Raleigh

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Raleigh · Response within 24h · No commitment · ☎ (984) 733-0998

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Raleigh ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm