Serving the Raleigh area  ·  (984) 733-0998  ·  Open Mon-Sun 7am-7pm
📞 (984) 733-0998 Free Quote

Metal Roofing in Wendell, NC (27591) · Local Professionals

Raleigh Metal Roofing · Fast response in Wendell and the Raleigh area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Wendell still feels like a small town, and its roofs show it. Around downtown and the older streets off Wendell Boulevard, you will find classic white farmhouses and early 1900s homes with tin roofs that have weathered decades of Piedmont sun and storms. Out toward the farms and newer subdivisions along Highway 64, the mix shifts to barns, metal shops, and 1990s to 2020s homes that need a roof built for the same heat, humidity, and afternoon thunderstorms.

Homeowners in Wendell (27591) call Raleigh Metal Roofing because we understand both sides of that mix. We have been working on metal roofs across Wake County since 2009, from the historic tin porches near the Wendell Community Center to the long panel roofs on poultry houses and equipment sheds east of town. When a storm rolls through and a fastener lets go or a limb punches through a panel, we know the local failure points and how to fix them right.

Metal Roofing in Wendell (27591)

Wendell sits in the rolling Piedmont, and the ground here can be heavy clay that holds water after a storm. On older in-town lots, that means we pay close attention to how runoff leaves the roof and where it pools near foundations and outbuildings. Many properties along streets like East Academy Street and North Pine Street have mature loblolly pines and oaks close to the house, so fallen limbs and pine straw buildup are a real concern. On the farm side, barns and tobacco barns often have long, low-slope panel roofs that take a beating from sun and wind, and they need durable corrugated or ribbed panels with fasteners that will not back out. Access can be tight on older lots with detached garages and sheds, so we plan staging and material delivery around driveways and property lines. Whether it is a Victorian-era porch roof near downtown or a modern standing seam roof on a new build off Rolesville Road, the work here is shaped by the same local conditions: hot summers, strong thunderstorm winds, and the occasional ice storm that brings down pines.

Our team has been serving Wendell and the surrounding Raleigh area since 2009, and we are a Metal Roofing Alliance Member. We are fully insured with general liability and workers' compensation, so you can feel confident having us on your property.

Our services in Wendell

How a Job Works in Wendell

Step 1: You call us at (984) 733-0998 or request a free estimate online. We schedule an on-site assessment at your Wendell property, whether it is a home in town or a barn out on the edge of the county. We inspect the roof, check fasteners, seams, flashing, and drainage, and talk through your options. You get a clear written estimate before any work begins.

Step 2: Once you approve the scope, we handle the work. For many Wendell jobs, that means coordinating with the local building department for permits, especially on full replacements. If your home is in a historic district or under an HOA, we help you understand any design review requirements before we order materials. On tight lots or farm properties, we plan deliveries and staging to keep access clear. Our crews are experienced with corrugated and ribbed panel roofing, standing seam, and screw replacement and re-fastening, which are common needs on older barns and outbuildings here.

Step 3: When the job is done, we clean up thoroughly. We remove old materials, sweep the site, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your roof ready for the next Carolina storm.

Pricing for metal roofing in Wendell depends on the size and pitch of your roof, the material you choose, access to the property, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are considering a retrofit over existing shingles, metal roof over shingles starts at $7 per square foot, but keep in mind that local code limits how many layers you can recover. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and gutter work for metal roofs starts at $9 per linear foot. Coating and painting start at $2.50 per square foot. For a accurate quote on your Wendell property, call us at (984) 733-0998 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Wendell and nearby areas.

My barn off Highway 64 has old corrugated panels with screws backing out. Can you re-fasten and replace the screws without replacing the whole roof?
Yes, that is a common job for us in the Wendell area. Screw replacement and re-fastening starts at $750 and often extends the life of a barn roof significantly. We inspect the panels for rust and fatigue, replace the failed fasteners with proper gasketed screws, and check the seams. If the panels are too far gone, we will tell you honestly and give you options for a panel replacement.
A storm just knocked a pine limb through my roof near downtown Wendell. How fast can you get out for an emergency repair?
We prioritize storm and wind damage calls in Wendell and the surrounding area. Call us at (984) 733-0998 and we will schedule the soonest available inspection, often within a day or two depending on call volume. We can tarp or secure the area to prevent further water damage and then give you a repair estimate. We do not promise a specific response time, but we move quickly when storms hit.
What does a typical metal roof replacement cost for a 1,500 square foot ranch home in Wendell?
For a ranch home that size, a metal roof replacement typically starts around $9 per square foot, so you might be looking at roughly $13,500 and up depending on the material, pitch, and whether we need to remove existing layers. Standing seam would be higher, starting at $10 per square foot. We give free on-site estimates so you get a number that fits your actual roof, not a guess.
Do I need a permit to replace my roof in Wendell, and how do I find out the rules?
Roofing permits are commonly required for a full replacement or re-roof in Wendell and Wake County, but thresholds and fees vary. We recommend checking with the City of Wendell website or the local building department before you start. We can help you understand the permit process as part of our free estimate, and we always defer to the local building department for the final word on requirements.
My neighbor and I share a property line, and I want to put up a metal roof that might change the runoff. What should I know?
Property line and drainage issues can get tricky, especially on older Wendell lots with narrow side yards. Before work begins, we review where your roof drains and make sure downspouts and gutters direct water away from the property line. If you are in an HOA, check the covenants for any restrictions on roof profile or color. We are happy to coordinate with you and your neighbor to avoid problems.
Are you insured for work on my Wendell property?
Yes, Raleigh Metal Roofing is fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request. You can feel comfortable having our crew on your property, whether it is a home in town or a farm building out in the county.
What maintenance should I do on my metal roof in Wendell to prevent leaks and storm damage?
In Wendell, the biggest issues are pine needles and limbs collecting in valleys and gutters, and fasteners loosening over time. We recommend an annual inspection, especially after storm season, to clear debris and check fasteners and seals. If you have trees close to the roof, keep them trimmed back. A metal roof inspection starts with a free estimate, so call us at (984) 733-0998 to schedule one.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Raleigh

All your work handled by qualified professionals in Raleigh

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Raleigh

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Raleigh · Response within 24h · No commitment · ☎ (984) 733-0998

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Raleigh ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm