Serving the Raleigh area  ·  (984) 733-0998  ·  Open Mon-Sun 7am-7pm
📞 (984) 733-0998 Free Quote

Metal Roofing in Wake Forest, NC (27587) · Local Professionals

Raleigh Metal Roofing · Fast response in Wake Forest and the Raleigh area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Wake Forest still feels like a small town even as it grows, and the housing stock shows it: 1980s and 1990s brick two-stories off South Main Street, newer vinyl-sided builds out toward Rolesville Road, and a handful of classic white farmhouses on larger lots where a standing seam roof just looks right. The loblolly pines are tall, the summers are humid, and the afternoon storms roll through hard.

We are Raleigh Metal Roofing, and we have been working out of Raleigh since 2009. Homeowners in 27587 call us because we know the difference between a tight lot near the Wake Forest Historic District and a wide-open property off Capital Boulevard, and because we show up when we say we will. We are a Metal Roofing Alliance member and fully insured, with general liability and workers' compensation coverage.

Metal Roofing in Wake Forest (27587)

Wake Forest sits in the rolling Piedmont, and the ground here matters. Many properties have grade that slopes away from the house, which is good for drainage, but it also means downspouts and gutters need to be sized right or water pools near the foundation. Tight lots near the historic district make staging tricky: we plan panel delivery and dumpster placement so we are not blocking a neighbor's driveway on a narrow street. Out on the larger lots, we deal with tree cover, and that means pine needles and leaf debris in valleys and behind chimneys. Our crews clear those areas and check flashing closely, because that is where leaks start. The other local issue is heat and humidity. Metal roofs handle it well, but ventilation and underlayment still have to be done correctly. We have been serving Wake Forest and the surrounding Raleigh area since 2009, and we have seen what works here.

We install standing seam, corrugated and ribbed panels, metal shingles, stone-coated steel, and copper. We also repair leaks, replace fasteners, fix flashing and chimneys, and handle storm damage. For Wake Forest's historic homes and modern farmhouses, black standing seam is a popular choice, and our insured crews are experienced with both standing seam and copper work.

Our services in Wake Forest

How a Job Works in Wake Forest

Step 1: You call us at (984) 733-0998 or request a free estimate online. We schedule an on-site assessment, look at the roof, the attic if accessible, the flashing, and the gutters, and we talk through what you are seeing. You get a written estimate with options, not pressure.

Step 2: Once you approve, we pull the required roofing permit through the local building department. Rules vary by jurisdiction, so we verify what applies to your address. If you are in an HOA or a historic district, we help with the design review paperwork and panel profile and color selection. On tight lots, we coordinate delivery and staging so the job runs smoothly. Our crews are fully insured, and we keep the site secure each day.

Step 3: When the work is done, we clean up thoroughly. We magnet-sweep for nails, haul away debris, and walk the property with you. We do not leave until you have seen the finished roof and understand the warranty and care information.

Pricing in Wake Forest depends on the size and pitch of your roof, the condition of the existing layers, access, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingles and stone-coated steel at $9, and copper and specialty metal at $20. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight work at $600. Coating and painting starts at $2.50 per square foot, gutters at $9 per linear foot, and snow guards and ice protection at $1,200. We give free estimates and free storm damage inspections. Call (984) 733-0998 to set one up.

✅ Metal Roofing Alliance Member, licensed and insured for work in Wake Forest and nearby areas.

My 1990s brick house off South Main Street has black algae streaks on the shingles. Is a metal roof going to fix that?
Yes. Those streaks are algae feeding on asphalt shingle surfaces, and they are common on shaded roofs in Wake Forest. A metal roof does not support that growth the same way, and it sheds pollen and debris better. We can show you panel and color options that fit the look of your neighborhood.
A pine limb came down on my roof during a storm. How fast can you get out to Wake Forest?
We offer free storm damage inspections and prioritize active leaks and unsafe conditions. Call (984) 733-0998, and we will schedule a visit as quickly as we can, usually within a day or two depending on storm volume. We document the damage for your insurance claim, though coverage decisions are up to your insurer.
What does a typical standing seam roof cost on a 2,000 square foot house in 27587?
Most jobs land somewhere between $18,000 and $28,000 for standing seam, depending on roof complexity, pitch, tear-off, and panel length. Access and the number of penetrations like chimneys and skylights affect the number. We give a firm written estimate after seeing the roof.
Do I need a permit for a metal roof in Wake Forest, and how do I check the rules?
A roofing permit is commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary. We verify the current rules with the local building department for your address. You can also check with the City of Wake Forest website for general information before you call us.
My HOA has design rules, and my neighbor's oak branches hang over the property line. What do I need to handle before the roof goes on?
We help you prepare the HOA design review submission, including panel profile and color samples. For overhanging branches, trimming is usually the homeowner's responsibility, and we can point out what needs to be cleared for safe access. We do not touch a neighbor's trees without your direction.
Are you insured for work on my Wake Forest property?
Yes. We carry general liability and workers' compensation coverage, and we can provide a certificate of insurance before work starts. Our crews are fully insured, so you are not exposed to liability for a worker injury on your property.
What maintenance does a metal roof need in Wake Forest's climate?
Keep gutters and valleys clear of pine needles and leaves, especially after fall and storm season. Check fasteners and sealant around flashing every few years. We offer inspections and maintenance, and we can re-fasten or replace screws if we find issues. Ice dams are less common here than up north, but we do see them on shaded eaves after ice storms.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Raleigh

All your work handled by qualified professionals in Raleigh

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Raleigh

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Raleigh · Response within 24h · No commitment · ☎ (984) 733-0998

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Raleigh ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm